Low Battery - SBS TEEARSETBT710K Manual Del Usuario

All manuals and user guides at all-guides.com
UK -
USER'S GUIDE
CHARGING
When the charger is connected, with the power on or off, the
headset will turn off. While charging, the LED indicator will show
a solid red light.

LOW BATTERY

lay once every 2 minutes. If the battery is not charged, the head
BATTERY STATUS ALERT
By pressing and holding the VOLUME DOWN button for 1 second,
you can check the battery status of the TEEARSETBT710K
while in standby mode or playing music. The audible battery
status alert will inform you of the battery level. There are 3 levels
of battery power:
1. Battery High
2. Battery Medium
3. Battery Low
POWER ON / POWER OFF
Slide the power switch to the 'ON' or 'OFF' position.
PAIRING
Before using the headset for the first time, you must pair it with a
Bluetooth-enabled device.
There are 2 pairing mode methods with the TEEARSETBT710K .
1) Easy Pairing
a) Slide the power switch to the "ON" position.
b) If it is your fi time pairing the device it will automatically enter
pairing mode. If it has been paired but no paired device is in range
it will enter pairing mode after 10 seconds. The LED indicator will
be solid blue.
c) On the device you wish to pair, find the Bluetooth menu and
"search for" or "add" new devices.
d) Select " TEEARSETBT710K " from the list of devices.
e) If asked for a Pass/Pin Code enter 0000 (4 Zeros).
f) Once the devices are paired, you will hear "headset paired".
The TEEARSETBT710K will automatically turn off if not paired
within 3 minutes.
2) Manual Pairing (pairing with another phone or re-pairing)
a) With the power off, press the CALL button and slide the power
switch to the 'ON' position at the same time for 1 second.
b) When the headset enters Pairing Mode, the LED indicator will
show a solid blue light. After the procedure repeat Easy Pairing
steps c) through "f".
MULTI-CONNECTION
Advanced Multipoint
The TEEARSETBT710K is capable of having two devices
connected to the headset at the same time. This will give you
the freedom of using call waiting between calls on both of your
connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets.
(pairing instructions on page 4).
- Turn off the headset.
5