Oxford Drystash Manual De Instrucciones página 4

GB
TAILPACKS
Included: • 1 Tailpack • Integral Seatbelt
Advice to the user:
Before fitting your Tailpack, always ensure that the surface onto which it is to be fitted is completely free from any
dirt. This is because even the finest of residue can lead to marking. It is designed to be attached onto a removable
rear seat/pillion seat of a motorcycle, not onto a seat hump/cover nor a rack. Roll closure at least 3 times and
secure with clip buckles.
To fit:
1. Unlock and lift seat of motorcycle (or pillion seat pad if motorcycle has one).
2. Thread the Hook and Loop seat straps through the holes provided in the
fold-out flaps (where applicable.)
3. Fasten bag securely to seat using Hook and Loop strap provided. This Hook
and Loop strap must be fitted tightly. Replace seat and lock into place.
4. If the Hook and Loop strap is too long it can be cut down with a pair of scissors. However, ensure a minimum
15cm overlap/contact patch is still achieved.
5. Bungees or webbing straps have been included which are suitable for many motorcycles. However, you
may need to purchase bungees to suit your specific motorcycle to ensure a completely secure and stable
attachment.
6. Attach the straps under tension to suitable, secure parts of the motorcycle frame, such as a dedicated luggage
hook or foot rest. Ensure that the front straps are tensioned towards the front of the motorcycle and the rear
straps are tensioned towards the back of the motorcycle.
7. Ensure that no part of the straps or bag can damage your motorcycle and that it does not rub
against any moving or hot parts of the motorcycle, thus causing it to fray, burn or otherwise weaken.
8. There are two Hook and Loop rings on the base of some tailpacks and matching D-rings on the main bag.
Once the base is zipped on the loops should be passed through the D-rings and the Hook and Loop attached
to the base of the bag.
WARNING
• Do not overload – maximum recommended loading capacity 5 kg
• I t is the owner's responsibility to ensure that the luggage is attached in such a way that it does not
damage or put at risk the owner or any property of the owner.
• D o not exceed the UK legal speed limit. This product has only been tested for use at UK road legal
speeds.
• R egularly check cords for wear and replace if they show any signs of weakening or friction damage.
These can be purchased from your local dealer.
• W hen using bungee cords should not be stretched beyond their elasticity (approx. 175% of their original
size).
• E nsure that no part of the straps or bag can damage your motorcycle and that it does not rub against
any moving or hot parts of the motorcycle such as the exhaust, thus causing it to fray, burn or otherwise
weaken.
PLEASE NOTE
• If the luggage is not attached securely, it may become detached and fall into the back wheel, causing serious injury and even
death
• Tailpacks must NOT be attached to motorcycle seat humps They are only suitable for motorcycles with detachable seats (under
which the Hook and Loop strap should be locked into place). The Hook and Loop strap should NOT be fastened underneath the
rear body work where it may come into dangerous contact with the rear wheel.
All manuals and user guides at all-guides.com
• 1 Pack of Webbing Straps
Tailpacks must be attached
to the pillion seat using the
4
integral seat-belt strap &
additional straps