Exchange Oil Container Lc - Bosch Rexroth LU 2 Instrucciones De Montaje

46/54 Maintenance and repair
Please note:
• If the LED indicators are
fl ashing red (RD) on the
drive and LC appears
in the display, the oil
container is empty and
must be replaced.
1. Remove the connection
cable from the
lubrication unit.
Please note:
Only in impulse mode: After
re-establishing the supply
voltage a delivery process is
carried out.
2. Open the holder (D).
3. Unscrew the entire
lubrication unit out of
the support bracket (E).
4. Loosen the union nut
and remove the drive
(B) from the empty oil
container (C).
5. Dispose of the empty oil
container in accordance
with local regulations in
your country for oil and
grease waste.
Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2018-12
11.4.1

Exchange oil container LC 2

RD
D
2
Fig. 21: Disassemble oil container LC 2
1
RD
4
2
3
B
C
E
358 814-23