Exchange Battery Lu - Bosch Rexroth LU 2 Instrucciones De Montaje

48/54 Maintenance and repair
Please note:
• If the LED indicators on
the drive and the display
are red, the battery is
empty and must
be replaced.
1. Remove the connection
cable (A) from the
lubrication unit.
2. Loosen the union nut and
remove the drive (B) from
the oil container (C).
3. Open and remove the
battery compartment (D).
1
) No scope of delivery,
simultaneous loosening
of the two locking
mechanisms with any
tool (e.g. welding wire,
paperclip or 2 pens).
4. Remove the control
board (E).
5. Exchange the battery
(CR 2450, 3 V).
6. Install the control board.
7. Install the battery
compartment.
8. Install the Install drive
on oil container LC 2
(see page 31 + 32).
9. Connect the connection
cable to the lubrication
unit.
Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2018-12
11.4.2

Exchange battery LU 2

A
1
2.2
C
E
6
"Click"
7.2
Fig. 23: Exchange battery LU 2
9
B
8.1
2.1
8.2
4
5.2
7.1
D
3.2
1
)
3.1
5.1
CR2450
3V
"Click"
7.2
358 814-52