Personal Protective Equipment; Owner Responsibilities; General Notes On Property And Product Damage - Bosch Rexroth LU 2 Instrucciones De Montaje

During maintenance and
servicing
During disposal
During cleaning
• Make sure that access to maintenance and inspection points is kept unobstructed.
• Perform the prescribed maintenance work at the intervals prescribed in
section 10.3 on service.
• Make sure that no line connectors, connections or components are disconnected
as long as the system is supplied with pressure and voltage. Secure the system
against being switched back on.
• Dispose of the product in accordance with the regulations in your country.

2.7 Personal protective equipment

• Appropriate protective clothing should be worn when handling/using the product
(e.g. safety shoes, close-fi tting clothing, a hair net for long, loose hair).
As the system user or operator, you are personally responsible for ensuring the use
of appropriate protective equipment when the product is being used.
All pieces the personal protective equipment must be intact.

2.8 Owner responsibilities

• Before fi rst use or re-commissioning of a conveyor system, run a risk assessment in
accordance with DIN EN ISO 12100.
• Before initial commissioning, make sure there are no protruding or sharp-edged
parts that may be a hazard to personnel working or moving in the area.
• Provide safety-related instructions to the operating personnel before initial start-up
or restarting, and then at regular intervals.
3 General notes on property and product
damage
The warranty only applies to the delivered confi guration.
• The warranty is void in the event of faulty installation, start-up and operation,
as well as improper use and/or improper handling.
• Prevent cleaning agents from getting into the system.
• Never use solvents or corrosive cleaning agents.
• Do not use a pressure washer for cleaning.

General notes on property and product damage

3 842 358 814/2018-12, MIT: LU 2, Bosch Rexroth AG
11/54