Impulse Mode - Bosch Rexroth LU 2 Instrucciones De Montaje

6.2 IMPULSE mode

In IMPULSE mode delivery volume can be entered in defi ned steps.
According to the volume of the oil container entered LC 2 (= LC250), a certain
number of lubricant deliveries follow, with the appropriate delivery volume.
Please note: The quantity delivered should be released when the chain is running.
• The operating mode, the remaining impulses (deliveries) per set oil container, the
• If the number of remaining impulses (deliveries) is 100 or greater, the following
• The delivery is carried out once with supply voltage (rising fl ank).
• The supply voltage must be present at least as long enough for the delivery process
• Before the following delivery the supply voltage must be shut down for > 1 s.
• The signaling/display of system states and errors is only possible when the supply
358 814-26
oil container used (LC 250), and the required delivery volume per impulse
(delivery) are entered via the display using the SET button.
indicator appears in the display
to be completed (min. 2 minutes).
voltage is present.
>
99
(Field in the table with a gray background).
3 842 358 814/2018-12, MIT: LU 2, Bosch Rexroth AG
Function 19/54