Klarstein Spin Doctor Manual De Instrucciones página 9

All manuals and user guides at all-guides.com
4
Lift fan until the screws
reach the bottom of the
slots and then rotate the
canopy counterclockwise
until the screws drop into
the slot redesses.
Unscrew the regulator cover, Connect wires through the inlet hole according to the
diagrams. Mount the regulator on wall on a wooden base block.
5
Insert the other two set
screws and washers.
Tighten all the screws,
make sure that the
canopy is secure and
that you have not
trapped any wires.
7
6
Install the fan blades
onto the motor by
tightning the hexafonal
screws and spring
washers.
EN
9