Bixolon SRP-370 Guia De Instalacion página 2

◈ Self-Test
1. Make sure the paper roll has been installed properly.
2. Turn on the power while holding down the FEED button. The self-test begins.
3. The self-test prints the current printer status, providing the control ROM version and the
DIP switch setting.
4. After printing the current printer status, self-test printing will print the following, and
pause. (The PAPER LED light blinks.)
Self-test printing.
Please press the FEED button
5. Press the FEED button to continue printing. The printer prints a pattern using the built-in
character set.
6. The self-test automatically ends and cuts the paper after printing the following.
*** COMPLETED ***
7. After the self-test is complete, the printer returns to normal on-line status.
※ Note
The self-test lets you know if your printer is operating properly. It checks the print quality,
ROM version, and DIP switch settings.
◈ Specifications
Item
Printing Method Thermal Line Printing
Dot Density 180 dpi (7dots/mm)
Printing Width 72 mm
Characters per line 180 DPI 42 (Font A)
(default) 56 (Font B)
Mono: 47.28 lines/sec (1/6" Feed) 200 mm/sec
Printing 180 DPI
Color: 23.6 Line/ Sec (1/6inch feed) 100 mm/sec
Speed
Mono: 52 lines/sec (1/6" Feed) 195 mm/sec
*1) 203 DPI
Color: 21 Line/ Sec (1/6inch feed) 90 mm/sec
Receive Buffer Size 64K Bytes
SMPS Input Voltage 100~240 VAC
Printer
Frequency 50/60 Hz
SMPS Output Voltage 24 VDC
0 ~ 45 ℃ (Operating)
Temperature
-20 ~ 60 ℃ (Storage)
10 ~ 80 % RH (Operating)
Humidity 10 ~ 90 % RH (Storage)
(Except for paper)
Mechanism Head Life Monochrome: 70,000,000 Lines
*2) 2Color: 35,000,000 Lines
Auto Cutter 1,500,000 Cuts
Paper Type Paper Roll
Roll Width 79.5±0.5 mm, 82.5±0.5 mm
Roll Diameter Max 103 mm
Paper
Paper Thickness 0.062~0.075 mm
Inner : Ø12mm (0.47")
Paper Tube
Outer : Ø18mm (0.71")
※ Note
*1) Printing speed may be slower depending on the data transmission speed and the
combination of control commands.
*2) The above values are calculated under printing level 2 with recommended paper at
normal temperature.
The values may vary with environment temperature, printing level, etc.
◈ Serial (RS-232C) Fixed Interface Model Windows Driver
Installation: IFA-S TYPE
1. After running the product installation CD, run the Thermal Printer > SRP-370 > Drivers
> Windows Driver > Drivers Folder > Win SRP-370_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select Port Type window, select one Serial Port and click Next.
(Figure 1.)
5. In the Question window, select Yes and the computer will reboot.
6. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-370 Icon >
Right-Click > Properties.
7. In the Properties window, select the Port tab and click on the Port Settings. Check to see
that the information is identical to the self-test results after installation.
All manuals and user guides at all-guides.com
8. In the Properties window, after selecting the General tab, click on Print Test Page to
◈ Parallel (IEEE1284) Fixed Interface Model Windows Driver
1. After running the product installation CD, run the Thermal Printer > SRP-370 > Drivers
2. In the opening installation window, click on Next.
Details
3. In the Ready to Install the Program window, click on Install.
4. In the Select Port Type window, select one Parallel Port and click Next.
203dpi (8dots/mm)
5. In the Question window, select Yes and the computer will reboot.
203 DPI 48 (Font A)
6. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-370 Icon >
64 (Font B)
7. In the Properties window, after selecting the General tab, click on Print Test Page to
◈ USB Fixed Interface Model Windows Driver Installation:
1. After running the product installation CD, run the Thermal Printer > SRP-370 > Drivers
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select Port Type window, select USB and click Next. (Refer to Figure 1.)
5-1. If using Windows 98/ME:
5-2. If using Windows 2000:
5-3. If using Windows XP:
※ Note
When the digital registration message appears during installation, click on either OK or
Continue Anyway.
6. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-370 Icon >
7. In the Properties window, after selecting the General tab, click on Print Test Page to
confirm that printing is normal.
◈ Ethernet Fixed Interface Model Windows Driver Installation:
Refer to the user manual regarding separate Ethernet interface cards. (Refer to the CD.)
◈ WEEE (Waste Electrical and Electric Equipment)
☎ BIXOLON Co., Ltd.
● Website
● Korea Headquarters
● U.S. Office
● Europe Office
confirm that printing is normal.
Installation: IFA-P TYPE
> Windows Driver > Drivers Folder > Win SRP-370_Vx.x.x.exe file.
(Refer to Figure 1.)
Right-Click > Properties.
confirm that printing is normal.
IFA-U TYPE
> Windows Driver > Drivers Folder > Win SRP-370_Vx.x.x.exe file.
① After completing the installation procedures, reboot the computer.
② After rebooting, turn the printer power off and back on.
③ After the New Hardware Detected window appears, continue to click Next to install the
USB drive, and then reboot the computer once more.
① After the Information window appears, turn the printer off and back on and click Yes.
② After installation is complete, reboot the computer.
① After the Information window appears, turn the printer off and back on and click Yes.
② After the New Hardware Detected window appears, continue to click Next to install the
USB drive, and then reboot the computer.
Right-Click > Properties.
IFA-E TYPE
This marking shown on the product or its literature, indicates that is should not be
disposed with other household wastes at the end of its working life, To prevent
possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details
of where and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
http://www.bixolon.com
(Add) 7~8F, (Sampyeong-dong), 20, Pangyoyeok-ro241beon-gil,
Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400, Korea (ROK)
(Tel.) +82-31-218-5500
(Add) BIXOLON America Inc., 3171 Fujita St, Torrance, CA 90505
(Tel.) +1-858 764 4580
(Add) BIXOLON Europe GmbH, Tiefenbroicher Weg 35 40472 Düsseldorf
(Tel.) +49 (0)211 68 78 54 0