Personal Configuration Of The Standard Cycles; Resetting The Counters; Standard Factory Programming - Lacor Ice Manual De Instrucciones

4.2.2. Personal configuration of the standard cycle*
1. Press the configuration button.
2. On-screen, you will be asked for a 4-digit code.
3. Press the (MAX) key to skip the field, or (+) to validate, or (-) to insert data. For example:
1 2 3 4
4. To move within the different fields, use the (+) or (-) keys with the cursor and the
(MAX) key to enter the field.
5. Once you are in the field, the cursor will appear with the (<) symbol, validate with the
(MAX) key and the field will be marked with the (*) symbol
6. Once the field has been marked with the (*) symbol, you will be able to modify the va-
lue within this field by going up with the (+) button or going down with the (-) button.
7. To confirm or validate, press the (MAX) key again.
* Consult the authorized distributor.

4.2.3. Resetting the counters

If the user wishes to control their LACOR equipment consumption, they can reset the
counters to zero once they have changed the CO2 gas bottle.
To reset the counters, press the (+) and (-) buttons for 5 seconds or until they are set to
zero.

4.2.4. Standard factory programming

CYCLE*
IMP. P ≤ U1 Pga.
IMP. P ≤ U2 Pga.
IMP. P ≥ U2 Pga.
Umb. Pga. 1-2
Umb. Pga. 2-3
T.on. open
T.off. pause
Tiemp./vasos
Tiemp. purga
Presión Max
* To set up this parameters please contact the manufacturer
28
ECO MIN.
2 3
2 3
2 3
45 45
50 50
120 120
110 110
300 300
80 80
75 75
ADVANCE
MED. MAX.
3 4
3 4
3 4
45 45
50 50
140 160
130 130
300 300
80 80
75 75