Scope Of Delivery; Dimensions; Installation Example; Spray Pattern - Franke AT3O0039 Instrucciones De Montaje Y Uso

8.

Scope of delivery

Quantity
1
4
1
2
1
1
9.

Dimensions

10. Installation example

11. Spray pattern

12. Assembly

Warning!
Only operate the fitting with non-return valves and the specified filters.
Failure to observe this instruction can result in an increased germ load in the
drinking water and thus pose a health or mortality risk.
Warning!
• Operate the product only with safety extra low voltage (SELV). The components
must not be earthed.
• Place the power supply (not part of the delivery, see accessories,
outside the wet area in a separate room.
• Protect the power supply with a residual current circuit breaker (RCD).
Failure to observe this instruction can result in death or material damage due to
electric shock or fire, for example.
☞
Important!
Prior to the assembly process, flush the pipework in accordance with DIN 1988.
☞
To protect the tiles, use masking tape when marking and drilling. Drill at low speed.
☞
Depending on the composition of the wall, special wall plugs may have to be used
(to be provided by the customer).
☞
Lay the system line (not included in delivery) in the empty pipe (to be provided by the
customer) from the power supply to the fittings and loop through.
Fig. A: Water connection from above
Fig. B: Water connection from the rear
Name
Stainless steel shower panel with:
Thermostat, electronic module M1, piezo button,
solenoid valve cartridge, lockable water volume
regulators, connection pipes and AQUAJET
Slimline shower head
Wood screw, wall plug
Suspension rail
Connection bracket
0.15 l/s flow rate regulator
Installation and operating instructions
- 6 -
Chapter 27)