Scope Of Delivery; Dimensions; Installation Example; Assembly Instructions - Franke AQUAMIX 76 12982 000492 Instrucciones De Montaje

5.

Scope of Delivery

Quantity
2
1
1
6.

Dimensions

7.

Installation example

8.

Assembly Instructions

8.1 Flush the pipes in compliance with DIN 1988.
8.2 Install the offset-type screw connector.
8.3 Install the screw rosettes.
8.4 Install the fitting.
!
Caution!!
Do not forget the mesh washer.
9.

Function

9.1 Open both water flow volume regulators (a) SW 3.
9.2 Actuate the push-cap handle to start the flow of water.
☞
Water flow stops automatically, depending on the flow duration that has been set.
9.3
Turn the push-cap handle to select the desired temperature.

10. Adjusting flow duration

10.1 Use a screwdriver to carefully prise up the plug.
10.2 Remove the plug.
10.3 Use an Allan key (SW 2.5) to loosen the set screw.
10.4 Remove the push-cap handle.
10.5 Use a screwdriver to adjust the flow time.
a: Blade width 3 mm
+ longer flow time (max. 50 s)
Description
Offset-type screw connector, with mesh washers
and screw rosette
AQUAMIX self-closing single-lever mixer
Installation and operating instructions
5