Siemens SITRANS LR560 Guia De Inicio Rapido página 16

Electronic Device Description (EDD)
You can locate the EDD in Device Catalog, under Sensors/Level/Echo/Siemens AG/
SITRANS LR560.
To install a new EDD
• Go to www.siemens.com/LR560 > Support > Software Downloads to download the most
up-to-date EDD.
• Save the files to your computer and extract the zipped file to an easily accessed location.
• Launch SIMATIC PDM – Manage Device Catalog, browse to the unzipped EDD file and
select it.
Configuring a new device
1) Set Address via the device push buttons (default 126).
• In PROGRAM mode, navigate to: Level Meter > Communication (5)> Device Address
(5.1).
• Press twice to open parameter view and enable Edit mode.
• If required, key in a new value and press
value.
• Press to return to Measurement mode.
2) Launch SIMATIC PDM and create a new project for LR560. Upload parameters to the PC/PG.
3) Configure the device via the Quick Start wizard.
Quick Start Wizard via SIMATIC PDM
Notes:
• The Quick Start wizard settings are inter-related and changes apply only after you click on
FINISH AND DOWNLOAD at the end of the last step, to save settings offline and transfer
them to the device.
• Click on BACK to return and revise a setting or Cancel to exit the Quick Start.
Launch SIMATIC PDM, open the menu
Device – Wizard - Quick Start, complete all
the steps, then press Finish and Download.
Operating via FDT (Field Device Tool)
FDT is a standard used in several software packages designed to commission and maintain
field devices. Two commercially available FDTs are PACTware and Fieldcare.
To configure a field device via FDT you need the DTM (Device Type Manager) for the device.
Siemens instruments use SITRANS DTM and an instrument EDD written for SITRANS DTM.
1) First install SITRANS DTM on your system. You can download it from:
http://support.automation.siemens.com. Click on Product Support, and navigate to Product
Information/Automation Technology/Sensor systems/Process Instrumentation/Software &
Communications.
2) Install the SITRANS LR560PROFIBUS PAEDD for SITRANS DTM. You can download it from
the product page of our website at: www.siemens.com/LR560. Go to Support > Software
Downloads.
Configuring a new device via FDT
An Application Guide can be downloaded from the product page of our website under Support.
Page EN-14 SITRANS LR560 (PROFIBUS PA)
to accept it. The LCD displays the new
Quick
Start
A5E32043113