Mobicool A40 Instrucciones De Uso página 7

All manuals and user guides at all-guides.com
A-40
MOBICOOL cannot be held liable for damage resulting from
improper usage or incorrect operation.
2.3 Operating the device safely with 12 V DC
The cable between the battery and the cooler must be protected
by a fuse of max. 15 A.
Only use cables with the corresponding cable cross section
(see the table on page 10).
2.4 Operating the device safely with 220 V – 240 V
Only use the connection cable supplied to connect the device
to the AC mains.
Never pull the plug out of the socket by the cable.
If the cable is damaged, it must be replaced by a cable with
the same technical specifications to prevent possible electrical
hazards.
Before starting the device, ensure that the power supply line
and the plug are dry.
Check that the voltage specification on the type plate
corresponds to that of the energy supply.
2.5 Operating the device safely with gas
Only operate the device with gas outdoors.
Do not use gas to operate the device in cars, boats or enclosed
spaces.
When using the device in tents, awnings and on level patios,
ensure that there is sufficient air circulation and ventilation.
Never place the device near flammable materials (paper, dry
leaves, textiles).
Compare the pressure information on the type plate with the
pressure information on the propane or butane gas cylinder.
Never store liquid gas cylinders in unventilated areas or below
ground level (funnel shaped holes in the ground).
Keep liquid gas cylinders away from direct sunlight.
The temperature must not exceed 50 °C.
Safety instructions
7