Assembly Steps - Sauder County Line 419321 Manual Del Usuario

Step 1
Assemble your unit on a carpeted fl oor or on the empty carton to
å
avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK® FASTENER (10F)
å
into the large holes in the ENDS (A and B).
Repeat this step for the FRONT PANEL (F) and LOWER SHELF (H).
å
10F
(12 used)
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
B
A
419321
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Page 5