Assembly Steps - Sauder 414978 Instrucciones De Ensamblaje

Step 1
å
Assemble your unit on a carpeted fl oor or on the empty carton to avoid
scratching your unit or the fl oor.
å
With your hammer, gently tap ten CROSS SLOTTED DOWELS (24F) into
the LEG SUPPORTS (C), LOWER LEG SUPPORTS (D), and STRETCHER (E).
å
NOTE: Be sure the adjusting slot is facing up when inserting into the parts.
Also, be sure the adjusting slot points to the end of the part so the holes in
the DOWELS line up with the holes in the ends of the parts.
å
Fasten ten METAL BRACKETS (4G) to the LEG SUPPORTS (C and F). Use
ten BLACK 9/16" LARGE HEAD SCREWS (1S).
BLACK 9/16" LARGE HEAD SCREW
(10 used in this step)
www.sauder.com/services
1S
4G
(10 used)
F
C
C
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
The long slot should be parallel to
the long edges of the SUPPORTS
D
D
F
414978
and STRETCHER.
(10 used)
24F
E
C
C
Page 5