Preparation - Panasonic ES‑LV97 Instrucciones De Funcionamiento

Preparation

Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the main body rear terminals.
1
Insert the appliance plug
[C] into the self-
cleaning recharger [B]�
2
Remove the protective cap
[A1] while pressing the
side of the cap and insert
the shaver into the self-
cleaning recharger�
• Slowly insert the shaver into
the self‑cleaning recharger
taking care not to damage the
system outer foil.
3
Plug the adaptor [C] into a household
outlet�
• Check that the charge status lamp ( ) is glowing.
• Charging is completed after approx. 1 hour.
4
Disconnect the adaptor after charging is
completed�
14
ES-LV97_EU.indb 14
glows.
The number of the battery
2
capacity lamp will increase
as charging progresses.
3
Notes
• When charging the shaver for the first time or when it
1
has not been in use for more than 6 months, the
charging time may change or the charge status lamp
( ) may not glow for a few minutes. It will eventually
glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the
charge status lamp ( ) will blink quickly and the
battery may fail to charge properly in extremely high
or low temperatures.
• The shaver can be used for approximately 2 weeks
with a full charge.
(Based on one 3‑minute dry‑shave usages per day in
an ambient temperature range of 20 °C – 30 °C.)
The number of usable days varies depending on the
following conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑ Usage frequency of the sonic vibration cleaning mode
While charging After charging is completed
All the battery capacity lamp
and
turn off after 5 seconds.
will glow and then
2019/06/05 21:17:18