Publicidad
Idiomas disponibles
Idiomas disponibles
• Tighten both of the bottom tension knobs (4A) by turning them clockwise at the same time (4B).
• Tighten both of the upper tension knobs (4C) by turning them clockwise at the same time until the gap
between the gate and upper right corner come together, leaving a 1.5-2mm gap (4D).
• Use the wrench provided to ease turning the tension knobs ( gures 4E, 4F).
When tightening, the distance between the 4 tension bolts should be equal , as shown in gure 4G.
Opening the Gate Locking System ( gure 5A):
Closing and Latching the Gate ( gure 5B):
Publicidad
