Nolan X-lite X-902 Instrucciones De Utilizacion página 28

Racing Comfort
Removable and washable inner padding
13
14
inside the helmet. Repeat the same on the right side with the
other cheek pad.
2.1.4 - Follow the procedure described above and unhook the
rear left and right tabs from the frames (fig. 16) by slightly
deforming the shell sealing edge and by pulling the comfort
padding (at the height of the neck) towards the inner part of the
helmet.
2.1 - Removing the inner
comfort padding
Follow the instructions below
to remove the inner padding:
2.1.1 - Open the visor and the
chin strap, then pull the front
part of the cheek pad towards
the inner part of the helmet to
release the snap buttons on
the back. Repeat the same operation
with the other cheek pad (fig. 13).
2.1.2 - Unhook the front left tab from the
support on the inner shell by slightly
pulling the liner inside the helmet (fig. 14).
Repeat the same procedure with the
front right and central tabs.
2.1.3 - Unhook the lower left tabs of the
left cheek pad from the frames inside the
helmet (fig. 15).
Slightly deform the shell sealing edge
and gently pull the comfort padding
- 26 -