Battery-Operated Clipping Machine Econom Cl Sheep Shearing; Product Description; Scope Of Supply; Components Required For Operation - B.Braun Aesculap Econom CL Instrucciones De Manejo/Descripción Técnica

Aesculap

Battery-operated clipping machine Econom CL sheep shearing

►Keep the instructions for use accessible
for the user.
►Always adhere to applicable standards.
►Ensure that the electrical facilities in the
room in which the device is being used
conform to IEC norms.
►Unplug the device by pulling the plug, but
never by pulling the power cord.
►Do not operate the product in explosion-
hazard areas.
►Do not use the product if it is damaged or
defective. Set aside the product if it is
damaged.
Note
The charger can be used by children if 8 years
or older, as well as by persons with reduced
physical, sensory or mental capacities or
with lack of experience and knowledge, if
these persons are supervised or have been
instructed on how to use the device safely,
and if they understand the risks associated
with the use of the device.
►Do not allow children to play with the
device.
►Do not allow children to clean or main-
tain the device without supervision.
4
Econom CL Schafschur
®
2.

Product description

2.1

Scope of supply

Art. no. Designation
GT820 Battery-operated clipping machine Econom CL
sheep shearing
GT821 Li-ion battery
GT803 Charger
see Accessories/Spare Mains power cord (with device plug)
parts
TA015314 Instructions for use
GT604 Lubricator bottle
2.2

Components required for operation

■
Battery-operated clipping machine Econom CL sheep shearing
■
Charger
■
Mains power cord (with device plug)
■
Li-ion battery
2.3

Intended use

Battery-operated clipping machine Econom CL sheep shearing
The battery-powered shearing machine Econom CL sheep shearing is used
for shearing sheep.
Charger GT803/Li-ion battery GT821
The GT803 charger is used to charge the GT821 Li-ion battery.
2.4

Operating principle

Battery-operated clipping machine Econom CL sheep shearing
The battery-operated clipping machine Econom CL sheep shearing is
switched on and off using the on/off button 36.
Note
The on/off button only reacts after >0.5 s in order to avoid the machine
being switched on or off unintentionally.
Charger GT803/Li-ion battery GT821
The GT803 charger is designed for a mains voltage range from 100 V to
240 V and from 50 Hz to 60 Hz.
To make the charger GT803 ready for operation, connect it to mains power
by plugging in the mains plug.