Before The First Use - Domo DO607ED Manual De Instrucciones

· Make sure that children do not touch the cord or appliance.
· Keep the cord away from sharp edges and hot parts or other heat sources.
· Before use, remove all packaging materials and any promotional stickers.
· Unwind the cord completely to prevent overheating.
· Don't ever touch the blanket with wet or moist hands.
· When the blanket is used on a flexible bottom of a bed or is placed on two seperate
mattresses, make sure the blanket doesn't get stuck.
· Do not use pins, brooches, safety pins or sharp objects on the heated blanket because
these will damage the electrical wiring in the heating element.
· When the electrical blanket is connected:
· Don't place any heavy objects, such as suitcases, on the blanket.
· Don't place any heat source, such as a hot water bottle, on the blanket.
· Prevent animals from lying on the electrical blanket.
· The electrical and magnetic fields generated by this appliance may interfere with the
working of your pacemaker. Therefore check with your doctor and manufacturer of your
pacemaker first before using the blanket.
· Don't let incontinent people use the blanket.
· The blanket isn't meant to be used in a hospital.
· The device may not be used for persons who are not sensitive to heat or for infirm persons
who are not capable of reacting to over-heating.
PARTS
1. Heated blanket
2. Cable connection
3. Control panel

BEFORE THE FIRST USE

· Before using the blanket for the first time, you need to do the following: unwrap the
blanket carefully and remove all packaging materials. Keep the packaging (plastic bags and
carton) away from children. Check the blanket after unpacking for visual damage, possibly
caused by transport.
· Never use the blanket when it is folded, wrinkled or tucked in.
· Don't place any artificial heat sources, heavy and/or sharp objects on the electrical blanket.
· The electrical blanket has an overheating protection. This protection prevents the
overheating of the blanket over the whole surface, by cutting the power when a
malfunction occurs.
26
DO607ED
1
2
3