· Keep in mind that the blanket cannot be used anymore after this and needs to be returned
to your vendor.
USE
· Spread out the electrical blanket evenly over your mattres, starting at the foot of your bed.
· The electrical blanket cannot be folded, tucked in or laid around the mattress.
· Now place the sheets on the bed, like you normally do. This way the electrical blanket is
situated between the mattres and the sheets.
· Always make sure the electrical blanket is straight and doesn't get wrinkled up or gets
folded during use, especially when you have an adjustable bed or a mattres which consists
of more than one part.
· Make sure to check the blanket when you make up your bed, the electrical blanket can only
be used when it is laid out flat.
· We recommend to turn on the electrical blanket 90 minutes before going to bed and to
cover the blanket with your quilt or with the covers, to prevent the heat from escaping.
· Caution: not suited for use on water beds.
CONTROL PANEL
1.
Display
2.
On-off switch
3.
MODE: three heating zones
4.
TEMP: eight temperature settings
5.
QUICK: heat quickly
6.
TIMER: max. time setting 12 hours
1.
Click the cable securely into position in the heated blanket and insert the
plug in the wall socket.
2.
Turn the appliance on by moving the on switch to I.
3.
After use, turn the appliance off by moving the on switch to 0. Remove
the plug from the socket.
MODE
The MODE button allows a selection from three heating zones:
www.domo-elektro.be
New blenket item develop plan
3. Control panel looks
3
1
3
2
4
4. Switch and button define and function
【ON/OFF】Button:For comply energe standard, use mechanical switch.Turn off machine, the ratting is 0
W,turn on machine then LCD display all icon 1 s, CUP check itselft.If all fuction is ok,machine will automatic
work with 5 heating setting and fixed time 8 hours
】Button:Set function mode-body heatingn mode;feet heating mode,body and feet mode
【MODE
【QUICK】Button:Press it into quick heating function, machine will work with 8 heating setting and
30 minutes and then automaticly back to the initail setting
【TEMP】Button: press it then press 【+】and【-】could set heatting setting.
【TIMER】Button: press it then press【+】and【-】set heating setting
【+】Button: press it to increase temperature.
【-】Button: press it to decline time
4
5
6
5
6
2 page of 4 pages
- -
4
DO607ED
27