Domo DO607ED Manual De Instrucciones página 28

New blenket item develop plan
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine,machine will open LCD backlight,and LCD display all
1. Body
icon 1 S, then into "Body and feet heating mode".
2. Feet
3. Body & feet
The feet are at a greater distance from the heart and are
5.2 Select mode :
therefore often colder. The foot zone of the electric blanket
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
is always 5°C warmer than the body zone.
TEMP
The temperature can be set with the TEMP button. A selection can be made from eight
different temperature settings that vary from 20 °C to 50 °C.
Body mode
5.3 Select setting:
· Press the TEMP button. The temperature indicator on the display will begin to flash.
In any turn on condition, press【TEMP】Button，the temperature icon will blink，then
press【+】button，heating setting will increase, the highest is 8; press【-】button
· Press + or - to raise or lower the temperature.
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
· If no button is pressed, the selected temperature will flash and the blanket will heat to this
temperature.
· If the temperature setting is at 0, the blanket will not heat.
press "TEMP" "5" setting blink
QUICK
The QUICK button will heat the blanket to the hottest position (position 8)
for 30 minutes. It is possible to press this button at any time if the blanket is
turned on. The selected MODE will not change. Once the 30 minutes have
elapsed, it will revert to the previous setting.
TIMER
If no timer has been set, the blanket will continue to heat until you turn it off. A maximum
New blenket item develop plan
time period of 12 hours can be set with the TIMER button. After this time has elapsed, the
blanket will turn off automatically.
time
n condition, press【TIMER】button，the time icon will blink（fist set hour，then
· Press the TIMER button. The minutes on the display will begin to flash. Press + or - to adjust
then press【+】button，increase
the minutes. If no button is pressed, the selected time will flash.
ton, time will decline until 0 minute. 0 minute mean machine is non-fixed time
· If the + button is held pressed, the hours will also increase, but the hours can be set
separately as well. Press the TIMER button once again. The hours on the display will begin
to flash. Press + or - to adjust the hours. If no button is pressed, the selected time will flash.
press "+"increase time
time icon blink
· Once the selected time has been set, the blanket will heat for that period of time. The
remaining time can be read on the display. It will count down.
ating function
n condition，press【QUICK】button，machine into "quick heating mode" works
setting and 30 minutes, in time will back to initial setting.
28
DO607ED
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet During "Body and feet mode", use "Mode" button to select three mode:
"Body and feet mode" "Body and feet mode"
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine,machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
Body mode
3. Control panel looks
5.3 Select setting: 5.3 Select setting:
In any turn on condition, press【TEMP】Button，the temperature icon will bli In any turn on condition, press【TEMP】Button，the temperatu
press【+】button，heating setting will increase, the highest is 8; press【-】 Body mode press【+】button，heating setting will increase, the highest
Feet mode
5.3 Select setting:
will decline Temperature setting until reach 0, 0 setting does't heating , L will decline Temperature setting until reach 0, 0 setting do
In any turn on condition, press【TEMP】Button，the temperature icon will blink，then
display "Stand BY". display "Stand BY".
press【+】button，heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
4. Switch and button define and function
【ON/OFF】Button:For comply energe standard, use mechanical switch.Turn off machine, the ratting is 0
W,turn on machine then LCD display all icon 1 s, CUP check itselft.If all fuction is ok,machine will automatic
work with 5 heating setting and fixed time 8 hours
press "+" incease settings
press "TEMP" "5" setting blink
press "-"
【MODE
3 page of 4 pages 【QUICK】Button:Press it into quick heating function, machine will work with 8 heating setting and
30 minutes and then automaticly back to the initail setting
【TEMP】Button: press it then press 【+】and【-】could set heatting setting.
【TIMER】Button: press it then press【+】and【-】set heating setting
【+】Button: press it to increase temperature.
【-】Button: press it to decline time
press "TEMP" "5" setting blink
3. Control panel looks
5.4 Selection time
In any turn on condition, press【TIMER】button，the time icon will blink（fist set hour，then
time until set minute）then press【+】button，increase the longest
press【-】button, time will decline until 0 minute. 0 minute mean machine is non-fixed time
Press "TIMER" time icon blink press " - " decline time
5.5 Quick heating function
4. Switch and button define and function
【ON/OFF】Button:For comply energe standard, use mechanical switch.Turn off machine, the ratting is 0
In any turn on condition，press【QUICK】button，machine into "quick heating mode" works
W,turn on machine then LCD display all icon 1 s, CUP check itselft.If all fuction is ok,machine will automatic
work with 5 heating setting and fixed time 8 hours
with 8 heating setting and 30 minutes, in time will back to initial setting.
【MODE
【QUICK】Button:Press it into quick heating function, machine will work with 8 heating setting and
30 minutes and then automaticly back to the initail setting
【TEMP】Button: press it then press 【+】and【-】could set heatting setting.
【TIMER】Button: press it then press【+】and【-】set heating setting
【+】Button: press it to increase temperature.
【-】Button: press it to decline time
During "Body and feet mode", use "Mode" button to
New blenket item develop plan
"Body and feet mode"
New blenket item develop plan
Body mode
5.3 Select setting:
In any turn on condition, press【TEMP】Button
press【+】button，heating setting will increa
Body and feet mode Feet mode
will decline Temperature setting until reach
display "Stand BY".
press "+" incease settings
decline settings
】Button:Set function mode-body heatingn mode；feet heating mode，body and feet mode
3 page of 4 pages
2 page of 4 pages - - 4
press "+" incease settings
press "TEMP" "5" setting blink press "TEMP" "5" setting blink
New blenket item develop plan
New blenket item develop plan
time-12 hours; time
press "+"increase time
】Button:Set function mode-body heatingn mode；feet heating mode，body and feet mode
New blenket item develop
1 2
Body mode
Feet mode
5.4 Selection time
In any turn on condition, press【TIMER】button，the time icon will
set minute）then press【+】button，increase
press【-】button, time will decline until 0 minute. 0 minute mean m
Body and feet mode
Press "TIMER" time icon blink
5.5 Quick heating function
press "-" decline settings
In any turn on condition，press【QUICK】button，machine into "quic
with 8 heating setting and 30 minutes, in time will back to initial se
press "+" incease settings
3 page of 4 pages 3 page of 4 pages
5.6 In any turn on condition，when key part is broken, CPU will exzmi
display error info on LCD and open backlight, meantime all button are
output(Switch short circuit will output) blanket off power.
until the longest time-12
press " - " decline time
3
Feet mode Body and feet m Feet mo
time until
press "+"increase time
press "+" incease s
decline set
press "-"
3 page of 4 p
hours;
4 page of 4 pages
the
pre
p