Tools and Materials
Tape
Safety
Measure
Glasses
Claw
Hammer
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before
you start installation. If you encounter any installation or performance problems, please don't hesitate to
contact us. Our phone numbers and website are listed on the back cover. Thanks again for choosing Kohler
Company.
Before You Begin
Observe all local plumbing and building codes.
Unpack and inspect the bath for damage. Return the bath to the carton until you are ready to
install.
Corner installation is required for this bath.
You must have all the required components (bath, receptor, bench, apron and/or end panel) before
beginning the installation. When this bath is combined with a receptor, bench, apron and/or end
panel, the required assembly sequence is:
• Attach the bench (if used) to the receptor
• Install the receptor
• Install the bath
• Attach the end panel (if used)
• Install the apron
• Tighten the hardware and secure the flanges
• Install the shower door
Provide properly dimensioned framing.
Install the bath to an adequately supported, level subfloor.
The basin area requires no additional support when the subfloor is level and square with the stud
framing. Consider using shims for additional support if the subfloor is uneven.
Before installation, ensure proper access to the final plumbing connections.
Verify adequate mounting and connection space for the faucet.
Confirm adequate support for the faucet. Large deck-mounted faucets that may be inadvertently
used as a means of support are not appropriate or safe for this installation.
This bath conforms to ANSI Standard Z124.1. All dimensions are nominal.
1023717-2-B
All manuals and user guides at all-guides.com
Pencil
Level
Drill /
Square
Drill Bits
Sealant
Pliers
Plus:
#6 Large-head galvanized nails
Conventional woodworking tools and materials
Drop cloth
2x4's or 2x6's
Water-resistant wall material
Combination of socket wrenches
Knife
Rags
2
Phillips
Blade
Screwdriver
Screwdriver
Kohler Co.