Product Information (cont.)
NOTICE: Keep the area around the blower motor clean and free of sawdust, insulation, dirt, or other
small loose debris. Such material could plug the blower motor air intake and reduce the air flow through
the blower.
Features
Factory assembled components include a whirlpool pump with power supply cord, harness, whirlpool jets,
in-line heater, blower with power supply cord, air harness, two air switch transmitters, a heated surface
component, user keypad, and keypad cable. Assembly is required for power wiring, faucet valve and trim,
handshower, drain, anti-scald valve, and plumbing connections.
Connections and Service Access
Before installation, ensure proper access to the final connections.
Tools and Materials
Before You Begin
CAUTION: Risk of personal injury. This bath is extremely heavy. Obtain sufficient help to
carefully lift or move the bath.
CAUTION: Risk of personal injury. Do not remove, adjust, or alter any factory-installed
components of this product unless explicitly directed to within this installation guide.
CAUTION: Risk of personal injury. This product includes an anti-scald valve which requires
on-site installation. This anti-scald valve must be installed and adjusted according to the
instructions included to protect the bath user from scalding injury.
CAUTION: Risk of product damage. Do not support the bath by the rim.
NOTICE: This bath is designed for either a new three-wall alcove or an existing alcove for a standard 60"
(1524 mm) bath. For installation in an existing alcove, gap panels are provided and will likely require
cutting to fit.
NOTICE: Plumbing codes require the use of the flanges. Two flange styles are included with this product.
Choose the appropriate flanges for your installation.
Observe all local plumbing and building codes.
Kohler Co.
1/4" Hex
Wrench
100% Silicone Sealant
3
Plus:
• Circular Saw with
Masonry Blade
• Drop Cloth
• 2x4's or 2x6's
• Common Woodworking
3/4"
and Plumbing Tools
and Materials
1267113-2-C