Publicidad
GENERAL POWER TOOL SAFETY WARNINGS
e)
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may a ect the
power tool's operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations di erent from
those intended could result in a hazardous situation.
5)
SERVICE
a)
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
•
Hold power tool by insulated gripping surfaces, because the blade may
contact its own cord. Cutting a "live" wire may make exposed metal parts
of the tool "live" and could give the operator an electric shock.
•
Use clamps or another practical way to secure and support the workpiece
to a stable platform. Holding the work by hand or against your body
leaves it unstable and may lead to loss of control.
•
Keep hands away from cutting area. Never reach underneath the material
for any reason. Hold front of saw by grasping the contoured gripping
area. Do not insert fingers or thumb into the vicinity of the reciprocating
blade and blade clamp. Do not stabilize the saw by gripping the shoe.
•
Keep blades sharp. Dull blades may cause the saw to swerve or stall
under pressure.
•
Use extra caution when cutting overhead and pay particular attention to
overhead wires which may be hidden from view. Anticipate the path of
falling branches and debris ahead of time.
•
When cutting pipe or conduit ensure that they are free from water,
electrical wiring, etc.
!
WARNING: Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contain chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
- Lead from lead-based paints,
- Crystalline silica from bricks and cement and other masonry products, and
- Arsenic and chromium from chemically-treated lumber (CCA)
3
All manuals and user guides at all-guides.com
JIG SAW SAFETY WARNINGS
4
Tod
a c
efic
fáb
Gar
lue
dom
o c
cua
so
rem
La
ven
par
pol
Por
cua
tom
aut
req
Est
esp
En
má
ello
gar
Publicidad
