Publicidad
JIG SAW SAFETY WARNINGS
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your expose to these chemicals: work in a well-ventilated area,
and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
•
Avoid prolonged contact with dust from power sanding, sawing, grinding,
drilling and other construction activities. Wear protective clothing and
wash exposed areas with soap and water. Allowing dust to get into your
mouth, eyes or lay on the skin may promote absorption of harmful
chemicals.
!
WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety
glasses. Also use face or dust mask if drilling operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CPA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NOSH/OSHA respiratory protection.
WARNING: Use of this tool can generate and/or disperse dust, which may
!
cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate for the dust exposure. Direct particles
away from face and body.
!
CAUTION: Wear appropriate hearing protection during use. Under some
conditions and duration of use, noise from this product may contribute to hearing
loss.
•
When using an extension cord, be sure to use one heavy enough to carry
the current your product will draw. An undersized cord will cause a drop
in line voltage resulting in loss of power and overheating. The following
table shows the correct size to use depending on cord length and name
plate ampere rating. If in doubt, use the next heavier gage. The smaller
gage number, the heavier the cord.
Volts
120V
0-25
(0-7, 6m)
Ampere Rating
More
Not more
Than
Than
0
-
6
All manuals and user guides at all-guides.com
Minimum Gage for Cord Sets
Total Length of Cord in Feet
26-50
(7,6-15,2m)
American Wire Gage
18
16
5
51-100
101-150
(15,2-30,4m)
(30,4-45,7m)
16
14
Publicidad
