Metabo AXXAIR DC25-M1 Instrucciones De Manejo página 23

English
 Hold the trigger pushed in, make the plate tangential to the tube, then operate the
advance handle to carry out the required machining.
(One graduation = 0.1 mm of forward movement)
 When the machining is done, go back and stop the rotation of the machine.
 Loosen the tube. The machine is ready for another cycle.
All manuals and user guides at all-guides.com
- 23 -
Z.I. Les Bosses
F-26800 ETOILE-SUR-RHONE
www.axxair.com