RED CASTLE Nacelle Instrucciones De Uso página 15

Instructions for use
Hood :
Installing the hood on the carrycot. Insert the
ends of the hood into the places provided on
the carrycot then close the press studs located
on either side and at the back (1).
To remove it, inverse the procedure (2).
The hood is adjustable (3). There is a mesh
window at the rear of the hood to allow air to
circulate (4).
Fixed or rocker position:
Turn down the 2 horizontal plastic pieces
situated below the carrycot for it to be used in
the rocker position (5).
The base of the carrycot has holes which allow
the air to circulate.
Adjusting the backrest:
The backrest is height adjustable. To change
position, pull or push on the lever knob situated
below the carrycot to obtain the desired
position.
To raise it : push the knob towards the
middle (6).
To lower it: press the knob in, then pull it
backwards (7).
Apron and sun screen:
The apron attaches with press studs inside the
hood. The top part, close to baby's head, can be
folded back or attached to the hood (8).
Place the sun screen on the hood and close the
press studs at either side.
Position the lower part of the sun screen around
the end of the carrycot (9).
Adjusting the handle:
The handle makes it easier to carry the carrycot
and to install it on the stroller.
To adjust the handle
simultaneously on the knobs situated at either
side of the carrycot (10).
All manuals and user guides at all-guides.com
Securing the carrycot on the stroller:
The carrycot can be secured onto the chassis
of the SHOP'n JOGG II, WHIZZ, LUXOS and
CITYLINK 2 strollers thanks to the Attach brackets
included with the SHOP'n JOGG II and WHIZZ
strollers, available as optional accessories with
the LUXOS and CITYLNK 2 strollers. Please refer
to the Attach bracket instructions.
Using the carrycot in the car:
The carrycot can also be used to transport baby
in the car thanks to the carrycot Car kit (available
as an optional accessory).
To secure it in the car, please refer to the Car kit
instructions for use.
Care and maintenance:
The carrycot liner can be completely removed.
The carrycot includes a mattress + mattress
cover.
Washing the liner and the mattress cover:
machine wash at 30°. Leave open to dry
naturally.
To remove the liner:
- Remove the mattress
-Remove the liner
To replace the liner:
- Inverse the procedure.
Outer textiles (hood + apron):
Wipe clean only. Use only a mild cleaning
product. Dry in the shade. Do not machine
wash.
Any prolonged exposure to direct sunlight
may prematurely discolour the carrycot.
position, press
GB
14