Searching Every 10 Track In The Current; Folder; Using Compression And Bmx; Switching The Tag Display - Pioneer DEH-P3630MP Manual De Instrucciones

MP3/WMA/WAV Player
Searching every 10 track in
the current folder
If the current folder contains over 10 tracks,
you can search every 10 track. When the one
folder contains a lot of tracks, you can roughly
search the track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on the
previous page.
2 Press and hold c or d to search every
10 track in the current folder.
# If the current folder contains less than 10
tracks, pressing and holding d recalls the last
track of the folder. Also, if the remaining number
of tracks after searching every 10 tracks are less
than 10, pressing and holding d recalls the last
track of the folder.
# If the current folder contains less than 10
tracks, pressing and holding c recalls the first
track of the folder. Also, if the remaining number
of tracks after searching every 10 tracks are less
than 10, pressing and holding c recalls the first
track of the folder.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Press FUNCTION to select COMP.
Press FUNCTION until COMP appears in the
display.
2 Press a or b to select your favorite set-
ting.
Press a or b repeatedly to switch between the
following settings:
COMP OFFCOMP 1COMP 2
COMP OFFBMX 1BMX 2

Switching the tag display

It is possible to turn the tag display on or off, if
MP3/WMA disc contains the text information
such as track title and artist name.
! If you turn the tag display off, time to play-
back will be shorter than when this func-
tion is turned on.
1 Press FUNCTION to select TAG.
Press FUNCTION until TAG appears in the dis-
play.
2 Press a to turn tag display on.
TAG :ON appears in the display.
3 Press b to turn tag display off.
TAG :OFF appears in the display.
Note
When you turn the tag display on, this unit re-
turns to the beginning of the current track in
order to read the text information.
Displaying text information
on MP3/WMA disc
Text information recorded on a MP3/WMA
disc can be displayed.
Section
07
25
En