Error Codes - LaserLiner LaserRange-Master T3 Manual Del Usuario

Error codes:

Err204: Calculation error
Err208: Internal fault
Err220: Replace the battery
Err252: Temperature is too high: > 40°C
Err253: Temperature is too low: < 0°C
Err255: Received signal too weak or measuring time too long
Err256: Received signal too strong
Err261: Outside the measuring range
Err500: Hardware fault
Technical Data
Distance measurement
Precision (typical)*
Measurement range (inside) ** 0.2 m - 30 m
Angle measurement
Measuring range
Resolution
Precision
Laser class
Laser wavelength
Beam divergence
Operating conditions
Storage conditions
Automatic switch-off
Power supply
Dimensions (W x H x D)
Weight
* measuring distance up to 10 m with strongly reflective target surface
and at room temperature. The measurement deviation may increase by
± 0.2 mm/m for greater distances and under unfavourable measuring
conditions such as strong sunlight or weakly reflective target surfaces.
** at max. 5000 lux
16
EN
(Subject to technical changes without notice. 19W43)
± 2 mm
± 90°
0.1°
0.1°
2 / < 1 mW (EN 60825-1:2014/AC:2017)
650 nm
< 1.5 mrad
0°C ... 40°C, max. humidity
20 ... 85% rH, no condensation,
max. working altitude 2000 m
above sea level
-20°C ... 70°C,
max. humidity 80% rH
Dynamic depending on measuring
mode:
Laser: 30 s - 5 min
Device: 3 min - 8 min
2 x 1.5V LR03 (AAA)
35 x 100 x 23 mm
82 g (incl. batteries)