cecotec FAST&FURIOUS 8040 Absolut Manual De Instrucciones página 34

ENGLISH
The product may be used with tap water. If the lime content of the tap water is too high, use a
mix composed of 50 % of tap water and 50 % of water with low mineral content.
Remove the water tank from the boiler and fill it with tap water. Do not exceed the MAX mark
on its surface.
Install the water tank back in place. Let the water tank rest on its base and carefully push it
until it clicks into place.
Using the iron
Fig. 2.
Plug the appliance to the mains supply and press the power button. The power indicator light
and the steam indicator light will turn on. That means both the iron and the boiler have started
up.
Select the desired temperature with the temperature control dial according to the international
symbols on the label of your clothes.
Within about 2 minutes, the temperature indicator light will turn off. This means the iron is
ready to be used.
Within about 3 minutes, the steam indicator light will turn off. This means the iron is ready to
be operated with steam.
Steam ironing
When using the iron for the first time, iron a plain cloth first.
Choose one of the positions of the temperature control dial for steam ironing according to the
type of fabric to be ironed. Only positions (··) and (···) can be used when steam ironing.
Once the steam indicator light and the temperature indicator light turn off, the iron will be
ready to be used.
Press the steam button to release steam whenever necessary. This appliance is also able
to generate steam in a vertical position and can therefore be used to iron textiles such as
curtains, hanging clothes, etc. If you hear a loud water sound while ironing, there is no water in
the water tank. Press the power button to turn the appliance off and fill the water tank. Then,
turn the appliance on again and continue ironing normally.
Warning: Never attempt to open the cleaning valve while the boiler is under pressure.
Dry ironing
Select the desired temperature with the temperature control dial. Wait until the temperature
indicator light turns off before ironing.
The steam button must not be pressed when dry ironing.
Residual steam release
When you finish ironing, press the power button to turn the appliance off. Then, press the
steam button to release the residual steam that remains in the boiler.
34
FAST&FURIOUS 8040 ABSOLUTE