Dishware Drying - Bosch SHE55C Manual De Uso Y Cuidado

1) Close the door
2) Turn on
4) The unit will
then start
Figure 22
All manuals and user guides at all-guides.com
· Press the On/Off button to save the setting.
Delay Start
This option allows you to delay the start time of your dishwasher.
To activate:
· Turn the dishwasher on.
· Select the desired wash cycle.
· Press and hold the Delay Start button. Release when the desired de
3) Select a cycle
the display window.
OPTIDRY™
This feature senses when the unit is low on rinse a
time. For best performance, always use a liquid rinse agent eve
a drying additive.
Starting the Dishwasher
To start the dishwasher, follow the instructions in Figure 21
Interrupting a Cycle
NOTE : Should you need to interrupt a cycle (to add or rem
it is best to do so within the irst 30 minutes of the cycle.
WARNING
You could be seriously scalded if you allow hot wate r to splash out of the dishwasher.
OPEN THE DOOR CAREFULLY during any wash or rinse cyc
until water noises have stopped.
Wait at least ten seconds or until water noises stop before opening
resume the cycle, press the On/Off button and shut the dishwasher door.
Canceling or Changing a Cycle
To cancel or change a cycle, press and hold for three seconds the two buttons labeled "Cancel
Reset" as shown in Figure 22.
• the "Sanitized" light may appear. See section on Sanitization for more information.
• the countdown display will show "0" .
reduced and the "Sanitized" light may not illuminate. Your Dishwasher Installation Manual has
lay time is shown in
gent and automatically increases the drying
n if your detergent contains
ove an item, to add detergent, etc.),
le. Do not fully open the door
the dishwasher door. To
13