Dometic Travel Power
➤ Check the belt and pulley condition.
To ensure good performance, the area of contact between belt and
pulley should be as large as possible.
To ensure sufficient clearance for the belt and to maintain a large contact
area idlers and/or tensions may be stretched as shown in fig. b, page 8.
➤ Check if all screws are well tightened.
If necessary, tighten the screws with the correct moment.
➤ If necessary, clean the electrical connections.
13
Guarantee
The statutory warranty period applies. If the product is defective, please
contact your retailer or the manufacturer's branch in your country (see the
back of the instruction manual for the addresses).
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
14
Disposal
➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
EN
Guarantee
27