English (Original Instructions); Power Head; Definitions: Safety Guidelines - DeWalt DCMAS5713 Traducido De Las Instrucciones Originales

EngLIsh

POWER HEAD

DCMAS5713
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
EC‑Declaration of Conformity
o
Machinery Directive
Power Head
DCMAS5713
D WALT declares that the products described under Technical
e
Data are in compliance with:
2006/42/EC, EN60335‑1:2012 + A11:2014 + A13:2017 + A1:2019
+ A14:2019 + A2:2019, EN62841‑1:2015
Reference attachments for detailed noise and data information.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
31.12.2020
22
a

Definitions: Safety Guidelines

WALT one of the
e
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.




WALT at
e

WALT.
e
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.