Retrofitting A Safety Glass; Cleaning - Lunux IL UP Instrucciones De Montaje

ENG
7.

Retrofitting a safety glass

You can retrofit a safety glass to protect
the luminaire from below against environ-
mental effects.
NOTE: A suitable safety glass can be found
in the Hella range of accessories.
Fig. 10: Positioning the safety glass.
X Place the safety glass on the luminaire
from below, see Fig. 10.
Fig. 11: Fastening the safety glass.
X Fasten the safety glass to the luminaire
by folding all six holding clamps
upwards, see Fig. 11.
24
S-MA IL Up_00_405424811.indb 24
Retrofitting a safety glass
8.

Cleaning

WARNING
Danger of death due to electric shock.
X Disconnect the luminaire from the
power supply.
NOTICE
Material damage caused by using
wrong cleaning agents.
Damage to the luminaire.
X Make sure the cleaning agents are
compatible with the surface.
X Clean the luminaire with a cloth and a
mild detergent.
13.06.2017 07:41:01