Maintenance - TCL Sweeva 2000 Guia De Inicio Rapido

Maintenance

Note: Turn off the robot/remove the charging base from power before cleaning.
1. Cleaning the Dustbin
Press the buckle on the dustbin, remove from robot, forcefully open while still
holding the buckle, and dispose of contents.
2. Cleaning the Filter
While the dustbin is open, place your thumb to the left of the filter and pull
up to remove. Rinse the filter for 1 minute and shake off excess water. Reinstall
filter once completely dry (up to 24 hours or more may be required). (Monthly
cleaning is recommended, but no more than one time per month).
3. Cleaning the Roller Brush
Turn the robot over, press on both buckles to remove the brush cover, remove
brush from the right side, then clean the hair and debris from the brush using the
included tool before reinstalling.
4. Cleaning the Side Brushes
Turn the robot over, forcefully remove both side brushes , then use the cleaning
tool to remove hair and debris before reinstalling.
5. Cleaning the Omni-Directional Wheel
Remove the wheel and use the cleaning tool remove hair and debris before
reinstalling.