Uline H-951 Manual De Instrucciones página 7

TROUBLESHOOTING
OPERATING ISSUE CAUSES RECOMMENDATIONS
Conveyor not working
Machine not powered correctly. Check power switch is ON and power cord
is plugged into or wired to power.
Check that main power is ON.
Check fuse: Remove Top Panel (12 screws).
Check fuse (F5 1 Amp fuse) Connected to
wires 16 and 17. Replace if bad.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
PAGE 7 OF 21 0519 IH-951