Uline H-2304 Manual Del Usuario

H-2304
MANUAL STRETCH
WRAP MACHINE
TOOL NEEDED
9/16" Wrench
IMPORTANT! Read instructions thoroughly
and familiarize yourself with ALL controls and
operating features.
NOTE: Check the machine for damage.
If damage is found, contact Uline customer
service at 1-800-295-5510.
CAUTION! When servicing drive and controllers,
exposed components with housings or
protrusions may be at or above line potential.
Extreme care should be taken to protect
against shock.
IMPORTANT! Both the ramp and the machine
should be lagged to floor before use.
MACHINE DIMENSIONS
Length
Width
Height
Turntable Height from Floor
Maximum Load Size
Operation Space
Shipping Weight
PAGE 1 OF 15
1-800-295-5510
uline.com
Two Person Assembly
Recommended
SAFETY
SPECIFICATIONS
ELECTRICAL
102"
TURNTABLE
65"
94"
3⁄"
52" x 52 x 80"
106" L x 75" W
1,000 lbs
Pour le français, consulter les pages 11-15.
• User is responsible for conforming to all applicable
code requirements with respect to grounding all
requirements.
• Do not use extension cords to operate the
equipment.
• Disconnect AC input power before checking
components, performing maintenance, cleaning,
and when machine is not in use. Do NOT connect
or disconnect wires and connectors while power is
applied to circuit.
• Wiring work should be carried out only by qualified
personnel to avoid electrical shock or fire.
• Loose clothing must not be worn while the machine
is in operation. Stay clear of moving parts while the
machine is running.
• 120 VAC, 60 Hz, Single-phase, 15 AMP
• 1/2 HP 3-phase AC motor
• 1/2 HP AC frequency drive with acceleration and
deceleration control
• 12 RPM turntable maximum speed
• 4,000 lbs turntable maximum load capacity
Para Español, vea páginas 6-10.
0223 IH-2304