Working With The Tripod; Maintenance And Cleaning - Parkside PKLL 7 C3 Traducción Del Manual De Instrucciones Original

5. Align the cross line laser. To do so, release the retaining screw
by rotating anti-clockwise and move the cross line laser
8
into the desired position.
6. Fix the position by fastening the retaining screw

Working with the tripod

You can place the cross line laser in a stable position and adjust
the height using a tripod (not provided in scope of delivery).
Place the cross line laser with
your tripod and tighten by hand. Do not use excessive force as this
may damage the device.

Maintenance and cleaning

The product requires no maintenance.
ATTENTION! Never submerge the product in water or other
liquids. Do not allow water to enter into the product during
cleaning.
Keep the product clean to ensure good, secure work.
Use a dry cloth to clean the outside.
Clean the laser beam opening
of heavy contamination, remove the dirt with a slightly damp
Q-tip. Do not exert any strong pressure!
opened by a professional.
-thread
For repair purposes the product may only be
onto the
5
with a soft air jet. In cases
6
.
8
-screw of
GB/MT 71