∫ To manually enter the DVD recorder's IP
Address
On the DVD recorder
After step 6 (➡ page 17)
1
Press [3, 4] to select "Manual" and
press [ENTER].
TCP / IP Settings
SETUP
IP Address
.
Tuning
Subnet Mask
.
Others
Default Gateway
.
Disc
DNS Server
.
Picture
Sound
Press "Set" to store the values after input.
Display
SELECT
Connection
ENTER
Network
RETURN
2
Press [3, 4] to select "IP Address"
and press [ENTER].
3
Press the numbered buttons to enter
the number and press [ENTER].
≥Press [2, 1] to move the cursor.
≥Press [¢ CANCEL] to clear the numbers.
Repeat step 2 and 3 to enter "Subnet Mask", "Default
Gateway" and "DNS Server" numbers.
IP Address
If the computer's IP address is 192.168.0.15, enter
192.168.0. and then enter an arbitrary number, except 15,
between 2 and 254 (➡ page 18, step 4).
Subnet Mask
Enter the same set of digits as the computer's Subnet mask
(➡ page 18, step 4).
Default Gateway
Enter the same set of digits as the computer's Default
gateway (➡page 18, step 4).
DNS Server
Enter the same set of digits as the computer's Preferred
DNS server (➡page 18, step 4).
Example:
§
IP Address
:
192.168.0.14
Subnet Mask:
255.255.255.0
Default Gateway: 192.168.0.1
DNS Server:
192.168.0.1
§
Make a note of this IP address. You will need it when
operating this unit from the computer (➡page 57).
4
Press [3, 4] to select "Set" and
press [ENTER].
≥Once the connection has been correctly established "Now
connected to the network." will be displayed.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
All manuals and user guides at all-guides.com
.
.
.
.
.
.
.
.
Set
RQT7751
19
19