Frequently Asked Questions - Panasonic DMR-E500H Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Frequently asked questions

Set up
What equipment is necessary to play multi
channel surround sound?
Are the headphones and speakers directly
connected to the unit?
The television has a Scart terminal and
component video input terminal. Which
terminal should I connect with?
Is my television progressive output
compatible?
Disc
Can I play DVD-Video, DVD-Audio and
Video CDs bought in another country?
Can a DVD-Video that does not have a
region number be played?
Please tell me about DVD-R and DVD-RW
compatibility with this unit.
Please tell me about CD-R and CD-RW
compatibility with this unit.
Recording
Can I record from a commercially
purchased video cassette or DVD?
Can a DVD-R recorded on this unit be
played on other equipment?
Can I high speed transfer (dub) to a disc?
Can I record digital audio signals using this
unit?
Can a digital audio signal from this unit be
recorded to other equipment?
Can I switch to bilingual broadcast during
recording?
Network
The router's LAN port is insufficient.
The screen temporarily freezes.
All manuals and user guides at all-guides.com
≥This unit has a built-in decoder so you can enjoy multi-channel surround
sound by connecting an amplifier with AUDIO OUT 5.1ch terminals and
three or more speakers.
≥You cannot directly connect to the unit. Connect through the amplifier
etc.
≥If you have a regular television (CRT: cathode ray tube) we recommend
using the Scart terminal. You can enjoy high-quality RGB video from
this unit by connecting to an RGB compatible television.
If you have an LCD/plasma television or LCD projector compatible with
progressive scan, connect through the component video terminals for
high-quality progressive video.
If you have a CRT television or a multi system television using PAL
mode that is compatible with progressive scan, we cannot recommend
progressive output as some flickering can occur.
≥All Panasonic televisions that have 625 (576)/50i · 50p, 525 (480)/60i ·
60p input terminals are compatible. Consult the manufacturer if you
have another brand of television.
≥You cannot play DVD-Video if their region number does not include "2"
or "ALL".
≥The DVD-Video region number indicates the disc conforms to a
standard. You cannot play discs that do not have a region number.
≥This unit records and plays DVD-R. However, you cannot record onto
DVD-R discs that are finalized.
≥This unit also records and plays high speed recording compatible discs.
≥This unit does not record or play DVD-RW.
≥This unit plays CD-R/CD-RW discs (audio recording discs) which have
been recorded under one of the following standards: CD-DA, MP3 and
Video CD. Close the session or finalize the disc after recording.
≥You cannot write to a CD-R or CD-RW with this unit.
≥Most commercially sold video cassettes and DVD are copy protected;
therefore, recording is usually not possible.
≥You can play on DVD-R compatible players after finalizing the disc on
this unit; however, due to the condition of the recording, play may not be
possible.
≥You can record up to 64k recording speed to DVD-R and up to 40k
recording speed to DVD-RAM when using a high speed compatible
disc.
≥You cannot record digital signals. The digital audio terminals on this unit
are for output only. (The audio recorded using the DV automatic
recording function from a digital video camcorder, for example, is
recorded digitally.)
≥You can record if using the PCM signal. When recording DVD, change
the "Digital Audio Output" settings to the following in the SETUP menu.
–PCM Down Conversion:
–Dolby Digital/DTS/MPEG: PCM
However, only as long as digital recording from the disc is permitted and
the recording equipment is compatible with a sampling frequency of
48 kHz.
≥You cannot record MP3 signals.
≥With HDD and DVD-RAM, you can. Just press [AUDIO].
≥With DVD-R, you cannot. Change before recording with "Bilingual Audio
Selection" in the SETUP menu.
≥Commercially available devices can augment the connection port (hub).
After connecting the router and hub with a commercially available LAN
cable the computer and this unit should connect through the hub.
Please read the hub's operating instructions for further information.
≥This may occur depending on computer and network efficiency. It is
most likely when using a wireless LAN so a LAN cable is
recommended.
On
Page
9
9
7, 8
Cover
22, 33
61
47
64
32
64
10, 11
RQT7751
73
73

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido