TEC29EV
CAUTION!
!
Fire hazards
Do not install the generator in a box or room without any open-
ings, but in well-ventilated spaces instead.
Only operate the generator if you are certain that the housing
and the cables are undamaged.
Install the generator on a stable surface.
Do not tilt the generator more than 20° from the vertical position.
NOTICE!
A
Only use the device as intended.
The generator is not suitable for use in water vessels.
Do not make any alterations or conversions to the device.
If a welding operation has be done on the vehicle disconnect all
generator cables, otherwise the electronics may be damaged.
2.2
Handling electrical cables
WARNING!
!
The electrical power supply may only be connected by a quali-
fied electrician (e.g. according to VDE 0100, Part 721 in
Germany).
CAUTION!
!
Attach and lay the cables so that they cannot be tripped over or
damaged.
NOTICE!
A
Use cable ducts to lay cables through walls with sharp edges.
Do not lay loose or bent cables next to electrically conductive
materials (metal).
Do not pull on the cables.
EN
All manuals and user guides at all-guides.com
Safety and installation instructions
17