Stel TIG μP 253H AC/DC Manual De Instrucciones página 55

ENGLISH
TIG µP 253H AC/DC
COD. 6910000030
FUNCTION OF STORING AND LOADING WELDING PARAME-
TERS (JOB MODE)
Function active for all welding modes
This function allows you to store and load all the settings made on the generator at
any time. It is possible to save 99 welding parameters (settings) .
STORING WELDING SETTINGS
1) Hold down simultaneously for 1 second the buttons PG (ref.11 page 9) and F
(job mode) (ref.10 page 9); you will hear a double sound of the buzzer and the let-
ters PrG will blink on the left-hand display (ref.16 page 9) .
2) With the encoder A (ref.5 page 9) select the number of the programme in which
you want to save the welding parameters .
3) Hold down the HF ON button (ref.7 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters Sto will blink on the left-hand display
(ref.16 page 9). At this point the programme has been saved and you can continue
using the machine.
LOADING STORED WELDING PROGRAMMES
1) Hold down simultaneously for 1 second the buttons PG (ref.11 page 9) and F
(ref.10 page 9); you will hear a double sound of the buzzer and the letters PrG will
blink on the left-hand display (ref.16 page 9).
2) With the encoder A (ref.5 page 9) select the number of the programme that you
want to load .
3) Hold down the SL button (SET) (ref.8 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters ReC will blink on the left-hand display
(ref.16 page 9).
At this point the programme has been loaded and you can continue using the ma-
chine.
ATTENTION : a welding programme can be stored on a programme number alrea-
dy stored. The data
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL DESCRIPTION
55
ENGLISH
TIG µP 253H AC/DC
COD. 6910000030
FUNCTION OF STORING AND LOADING WELDING PARAME-
TERS (JOB MODE)
Function active for all welding modes
This function allows you to store and load all the settings made on the generator at
any time. It is possible to save 99 welding parameters (settings) .
STORING WELDING SETTINGS
1) Hold down simultaneously for 1 second the buttons PG (ref.11 page 9) and F
(job mode) (ref.10 page 9); you will hear a double sound of the buzzer and the let-
ters PrG will blink on the left-hand display (ref.16 page 9) .
2) With the encoder A (ref.5 page 9) select the number of the programme in which
you want to save the welding parameters .
3) Hold down the HF ON button (ref.7 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters Sto will blink on the left-hand display
(ref.16 page 9). At this point the programme has been saved and you can continue
using the machine.
LOADING STORED WELDING PROGRAMMES
1) Hold down simultaneously for 1 second the buttons PG (ref.11 page 9) and F
(ref.10 page 9); you will hear a double sound of the buzzer and the letters PrG will
blink on the left-hand display (ref.16 page 9).
2) With the encoder A (ref.5 page 9) select the number of the programme that you
want to load .
3) Hold down the SL button (SET) (ref.8 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters ReC will blink on the left-hand display
(ref.16 page 9).
At this point the programme has been loaded and you can continue using the ma-
chine.
ATTENTION : a welding programme can be stored on a programme number alrea-
dy stored. The data
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL DESCRIPTION
55