Specifications; General Characteristics; Generator Accessories - Stel TIG μP 253H AC/DC Manual De Instrucciones

ENGLISH
TIG µP 253H AC/DC
COD. 6910000030

2.0- SPECIFICATIONS

2.1- GENERAL CHARACTERISTICS

This new series of generators with electronic regulation controlled by a microproces-
sor allows you to achieve excellent welding quality, thanks to the advanced technol-
ogies applied. The microprocessor circuit controls and optimises the transfer of the
arc irrespective of the load variation and of the impedance of the welding cables.
The controls on the front panel allow easy programming of the welding sequences
depending on the operating requirements.
The inverter technology used has allowed the following to be obtained:
- generators with extremely low weight and compact dimensions;
- reduced energy consumption ;
- excellent dynamic response;
- very high power factor and yields;
- better welding characteristics;
- viewing of the data and of the set functions on the display.
The electronic components are enclosed in a sturdy structure that is easy to carry
and cooled with forced air by fans with low noise production.

2.2- GENERATOR ACCESSORIES

GENERATOR TIG µP 253H AC/DC
Earth cable
Electrode holder cable
Cable kit (earth cable + electrode holder cable)
Couplings kit
Settino-up kit
Trolley
A.W.C. T-S (autonomous cooling unit)
Torch TIG AIR
Torch TIG H²O
Remote control
Cable for remote control 10m
Cable for remote control 20m
Cable for remote control 30m
Pedal control
Torch tig tts 220 H20 4M UP-DOWN
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL DESCRIPTION
(Code 607110000L )
Code 602030000L
Code 601990000L
Code 601460000L
Code 608000000L
Code 608020000L
Code 608190000L
Code 607580000L
Code 6050500000
Code 6050600000
Code 606030000L
Code 607260000L
Code 607270000L
Code 607280000L
Code 606290000L
Code 6076000000
41
ENGLISH
TIG µP 253H AC/DC
COD. 6910000030
2.0- SPECIFICATIONS
2.1- GENERAL CHARACTERISTICS
This new series of generators with electronic regulation controlled by a microproces-
sor allows you to achieve excellent welding quality, thanks to the advanced technol-
ogies applied. The microprocessor circuit controls and optimises the transfer of the
arc irrespective of the load variation and of the impedance of the welding cables.
The controls on the front panel allow easy programming of the welding sequences
depending on the operating requirements.
The inverter technology used has allowed the following to be obtained:
- generators with extremely low weight and compact dimensions;
- reduced energy consumption ;
- excellent dynamic response;
- very high power factor and yields;
- better welding characteristics;
- viewing of the data and of the set functions on the display.
The electronic components are enclosed in a sturdy structure that is easy to carry
and cooled with forced air by fans with low noise production.
2.2- GENERATOR ACCESSORIES
GENERATOR TIG µP 253H AC/DC
Earth cable
Electrode holder cable
Cable kit (earth cable + electrode holder cable)
Couplings kit
Settino-up kit
Trolley
A.W.C. T-S (autonomous cooling unit)
Torch TIG AIR
Torch TIG H²O
Remote control
Cable for remote control 10m
Cable for remote control 20m
Cable for remote control 30m
Pedal control
Torch tig tts 220 H20 4M UP-DOWN
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL DESCRIPTION
(Code 607110000L )
Code 602030000L
Code 601990000L
Code 601460000L
Code 608000000L
Code 608020000L
Code 608190000L
Code 607580000L
Code 6050500000
Code 6050600000
Code 606030000L
Code 607260000L
Code 607270000L
Code 607280000L
Code 606290000L
Code 6076000000
41