Display Illumination - Cobra microTALK PR135 Manual Del Propietário

All manuals and user guides at all-guides.com
Using Your Radio
Operation
1.
Roger Beep Off
2. Press the
3. a. Press the
The setting you select will be saved when you turn
your radio Off and On again. When the "Roger
Beep" is On, the "Roger Beep" icon will be displayed.

Display Illumination

Light/Max Range
To Illuminate Your Display:
1.
Auto Squelch/Maximum Range
Your microTALK
which automatically shuts Off weak transmissions
and unwanted noise due to terrain, conditions, or if
you've reached your maximum range limit.
You can temporarily turn Off Auto Squelch or
turn On Maximum Range Extender, allowing all
signals to be received and extending the
maximum range of your radio.
Light/Max Range
To Temporarily Turn Turn Off Auto Squelch:
1.
If you hear two (2) beeps, you have turned the
Maximum Range Extender On (see below).
To Turn Maximum Range Extender On:
1.
To Turn Maximum Range Extender Off:
1.
English
8
Press and release the
the "Roger Beep" icon flashes. The current On
or Off setting is displayed.
Channel Up or Channel Down button
to select "Roger Beep" On or Off.
Mode/Lock button to enter the
new setting and return to
b. Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby Mode.
Press the Light/Max Range button to
illuminate the display for ten (10) seconds.
® radio is equipped with Auto Squelch,
Press the Light/Max Range button less than
five (5) seconds.
Press the Light/Max Range button for at least five
(5) seconds until you hear two (2) beeps which
indicates the Maximum Range Extender is On.
Press and release the
button or change channels.
Mode/Lock button until
Standby Mode.
Light/Max Range
•
•