Franke 3590040 FSBS 6001 N ID XS A+ Instrucciones Para El Uso E Instalacion página 23

Check if the refrigerator can pass a doorway or enter a door first.
en
Find a suitable place to install
❈
Sufficient space from refrigerator back to the wall
for free air ventilation.
Once the installation place is ready follow the installation instructions.
If surround temperature of refrigerator is low (below 5), foods can be frozen or the refrigerator can
Note
work in abnormal way.
All manuals and user guides at all-guides.com
❈ Avoid direct sunlight.
42
If the refrigerator can not pass through a door
during installation, follow these steps.
Removing Freezer Door
❈ Remove front bottom cover first, if it is attached.
Remove the bottom cover first.
Unscrew top hinge cover with a
Pull out the left collar of the
screw driver.
coupling first, then hold the
coupling and pull out the left
water tube.
(Dispenser Models Only)
Be careful not to damage the water
Lift up the front of hinge to
line when removing the door.
remove.
(After the hinge is removed the
door can fall down forward. Be
careful !)
Removing Refrigerator Door
Turn top hinge fastener
Unscrew top hinge cover with a
counterclockwise 3~4 times.
screw driver.
Disconnect harness wires.
Insert a thin screw driver into the
side groove of the cover to
remove.
Lift the door straight up to remove.
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness wires.
Lift up the front of hinge to
remove.
(After the hinge is removed the
door can fall down forward. Be
careful !)
43
en