Installing the Phone
Choose the best location to install your base and handset charge cradles. Your base
and handset charge cradles should be placed on a level surface such as a desk or
table top, or you may mount the base on a wall.
Connecting the AC (Electrical) Power
1. On the base, plug the AC power adaptor cord into the power jack on the back of the
base and the other into an electrical outlet. If desired, store the excess AC power
adaptor line cord inside desktop pedestal.
CAUTIoN: Use only the 5-2596 (black) or 5-2625 (gray color
adaptor for white unit) AC power adaptor that came with this
unit. Using other AC power adaptors may damage the unit.
. Plug the handset charge cradle into an electrical outlet.
NoTE: The charge indicator on the handset charge cradle turns on
to indicate the handset battery is charging
Connecting the Telephone Line
On the base, plug one end of the straight telephone line cord into the jack on the back
of the base and the other end into a modular wall telephone jack.
Connecting the Corded Handset
1. Connect one end of the coiled handset cord to the jack on the side of the base.
. Connect the other end of the coiled cord to the jack on the handset, then place the
handset in the base cradle.
10
All manuals and user guides at all-guides.com