display Messages
The following indicators show the status of a message or of the unit.
bLoCKEd NUMbER
dELETE?
dELETE ALL?
dELETE CALL Id?
ENd oF LIST
ENTER NAME
ERRoR
LINK HANdSET?/
LINK bASE?
NEW
No bATTERY
No dATA
PAGING
REPT
UNKNoWN CALLER The incoming call is from an area not serviced by Caller ID or
WAITING HANdSET/ Prompt telling you to enter registration mode of handset.
REGISTRATIoN
All manuals and user guides at all-guides.com
The person is calling from a number that has been blocked
from transmission.
Prompt asking if you want to erase one of the 10 numbers
stored in the phone's outgoing memory.
Prompt asking if you want to erase all Caller ID records.
Prompt asking if you want to erase the current Caller ID record
that is shown on the display.
Indicates that there is no additional information in Caller ID
memory.
Prompt telling you to enter the name in one of the 10 memory
locations.
Caller information has been interrupted during transmission or
the phone line is excessively noisy.
Prompt asking if there is a need to re-register the cordless
handset with the base or assign a new code for the system in
case of lost link.
Indicates call or calls have not been reviewed.
No battery is installed in the handset or the battery is not
properly connected to the battery jack inside the battery
compartment.
No Caller ID information was received.
Someone has pressed the page/intercom button on the base
or handset.
Repeat call message. Indicates that a new call from the same
number was received more than once.
the information was not sent.
39