Parts And Components; Before Use - cecotec FAST&FURIOUS 8010 VITAL Manual De Usuario

ENGLISH

1. PARTS AND COMPONENTS

Steam station
Fig. 1.
1. Steam toggle button
2. Clean button
3. Water spray button
4. Function indicator
5. Spray nozzle
6. Soleplate
7. Water inlet cover
8. Water tank
9. Cord winding groove
10. Unit base
11. Thermal insulation stand
12. Temperature knob
13. Temperature indicator
14. Handle
15. Steam trigger
Temperature knob
Fig. 2.
1. 170 ºC-225 ºC (Maximum)
2. 140 ºC-210 ºC
3. 100 ºC-160 ºC
4. 70 ºC-120 ºC (Minimum)
Buttons and light indicators
Fig. 3.
1. Eco steam rate indicator
2. Clean indicator
3. Max. steam rate indicator
4. Water spray button
5. Steam toggle button
6. Clean button

2. BEFORE USE

Take the product out of the box.
Remove packaging material, stickers and labels from the soleplate.
Clean the iron's soleplate with a soft cloth.
Fill the water tank with water and heat up the iron. Then, iron over a piece of damp cloth for
34 FAST&FURIOUS 8010 VITAL
FAST&FURIOUS 8020 FORCE
FAST&FURIOUS 8030 ULTIMATE
several minutes for the purpose of removing any residue on the soleplate.
Note: You may notice a slight burning smell or smoke when using the appliance for the
first time, caused by the excess of lubricants from the manufacturing process. Smoke will
disappear after a short time.
3. OPERATION
Water inlet cover
Open the water inlet cover and fill the water tank with water through the filling aperture.
Make sure the water does not exceed the MAX. mark on water tank.
Steam toggle button
The appliance can switch from MAX to ECO steam rates by pressing the steam toggle button.
The default setting is the MAX steam rate when the appliance is turned on. Press the steam
toggle button to select your desired steam rate. The corresponding indicator of the selected
steam rate will light up.
Temperature knob
Turn the temperature knob to set the desired ironing temperature based on the garment to be
ironed. To activate the steam function, select the appropriate temperature to produce steam.
Otherwise, steam will not be emitted efficiently.
Temperature indicator
When the iron is heating up, the temperature indicator will turn on. Once the iron has reached
the selected temperature, it will turn off. The temperature indicator will switch on and off as
the iron maintains the selected temperature during ironing.
Steam trigger
When the appliance is heated to the selected temperature, press the steam trigger for steam
to be sprayed from the soleplate continuously. Release the steam trigger to use the device for
dry ironing without steam.
Steam burst
Fig. 4.
Quickly press the steam trigger twice to produce a burst of steam, and the indicator of MAX
steam rate will blink. The steam burst function can be only activated when the appliance is
ENGLISH
FAST&FURIOUS 8010 VITAL 35
FAST&FURIOUS 8020 FORCE
FAST&FURIOUS 8030 ULTIMATE