_BA_CB-1200.book Seite 30 Donnerstag, 16. Februar 2006 12:11 12
Using the fresh air cooling system
Temperature setting
In the "Termperature setting" menu, you can set the target temperature in
steps of 1 °C in a range between 18 °C and 30 °C.
➤ To access the "Temperature setting" menu, press the "Temperature set-
ting" button (2 3, page 3).
✓ The set target temperature is displayed as well as the current room tem-
perature in brackets.
➤ Increase or reduce the target temperature with the "+" or "–" buttons (2 5
or 4, page 3) in steps of 1 °C.
✓ The new target temperature appears in the display.
➤ To exit the menu, press the "Temperature setting" button (2 3, page 3).
Blower setting
In the "Blower setting" menu, you can switch between blower levels 1 and 2.
➤ To access the "Blower setting" menu, press the "Blower setting" button
(2 6, page 3).
✓ The set blower level appears in the display.
➤ Change the blower level with the "+" or "–" buttons (2 5 or 4, page 3).
✓ The new blower level appears in the display.
➤ To exit the menu, press the "Blower setting" button (2 6, page 3).
Language selection
You can choose between ten different languages for the display on the con-
trol panel in the "Language selection" menu.
➤ To access the "Language selection" menu, press the "Temperature set-
ting" button (2 3, page 3) and hold it down for 5 seconds.
✓ The language currently set appears in the display.
➤ Use the "+" or "–" buttons (2 5 or 4, page 3) to switch between available
languages and press the "Temperature setting" button again (2 3,
page 3) to return to the standard display.
You can choose between the following languages:
German, English, French, Spanish, Italian, Dutch, Danish,
Swedish, Norwegian, Finnish.
30
All manuals and user guides at all-guides.com
CB-1200